Dial
011 2337 0551
E-mail
[email protected]
  Products and Its Salient Features

MECHANISED AUTOCLAVED FLYASH SAND LIME BRICKS
Made  of  siliceous sand, flyash and  lime,  Mechanised Autoclaved Sand Lime  Flyash bricks meet with high quality requirements to  generate a  high load bearing strength, long durability of  masonry  and can cut overall cost of construction to  extent of 20%.

SPIL Bricks offer following advantages:-
Compressive strength ranging between 100 to 120 Kg. per cm2 and  therefore possess an impressive strength to weight  ratio and high load bearing capacity. While  constructing with SPIL bricks, R.C.C. columns  can  be avoided  for construction upto four stories.  Similarly  for the  same  load wall of lesser thickness can be  constructed,  thus increasing available carpet area. Good  quality  with  even edges  and  controlled  dimensions offerings  a  smooth  finish which make  them  suitable  for internal  and external uses.  Plastering over brick  surface therefore may also  be avoided.
Can  be used as facia material both for a smooth finish  and rough finish thereby saving the cost of facia stones.
Available  in regular as well as in modular size. In case  of  huge quantity, can be  manufactured  in  different sizes also.
Reduce  the wastage quantum during handling to around 2%  to 3% only.
Most appropriate  resistance  to  atmospheric   conditions, optimum building properties in relation to heat storage  and insulation, absorption of water and protection from fire. Recommended for green building concept.
Construction  with SPIL Bricks is not only sturdy but  would also reduce construction time apart from enhancing aesthetic beauty.
Sand Plast (India) Limited has achieved a major breakthrough in  the country perhaps for the first time  giving  unparalleled  finish using flyash  upto 80% and perhaps this has been achieved by  Sand Plast(India)  Limited  for the first time in the  world  for mass production.
 
TECHNICAL SPECIFICATION:
Category Mechanised  Autoclaved Flyash Sand Lime bricks
Type of manufacturing Mechanised/Automatic plant
Dimension 228mm x 110mm x 72 mm (Common) 190mm x 90mm x 90mm (Modular)
Colour Grey
Surface Fine/Uniform
Compressive strength 100 Kg to 120 Kg per Sq Cm.
Insulation properties Excellent
Quantity required per CUM 417 Bricks (Common size), 480 Bricks (Modular size)
Efflorescence Nil
Gravity 1200 Kg/Sq cm
Specification  adhered BIS 12894-2002
 

    Compatibility of Features:

Features

Sand Plast’s Bricks

AAC Block

FAL-G Bricks

Traditional  Burnt Clay Bricks

Dimension

  228 x 110 x 72mm

625x250x125mm

225x106x63 mm

9”x4 ½ “ x 3” Claimed   Actual 220x105x67 mm

Specific Gravity

1100 Kg/cm3

850 Kg/cm3

1350 Kg/cm3

1900 Kg/cm3

Surface

Fine/Uniform

Fine/Uniform

Rough

Rough/Uneven

Broken bricks

3-5%

8-10%

15-20%

12-15%

Color

Grey

Grey

Dark Grey

Terracotta

Compressive strength

100- 130 Kg/cm2

20 -30 kg/cm2

10 -30 kg/cm2

35-70 Kg/cm2

Water Absorption

Slightly high-25%

Extra-ordinary high (upto 60%)

Very High               (40-50%)

With in the limit

Insulation

Excellent

Excellent

Moderate

Poor

Efflorescence

Nil

Nil

Common

High

Qty.  per m3 masonry

417

43

480

500

Mortar thickness

8 mm

8 mm

15 mm

15-18 mm

Plaster thickness

10 mm

10 mm

12-18 mm

12-18 mm

REMARKS

VALUE FOR MONEY. Eco-Friendly

High water absorption, low strength but light weight

Poor quality bricks. Low strength, high breakage

Tested but inferior  quality. Ecologically not suitable. Banned by Apex court. High mortar & Plastering  cost.

BIS code

12894-2002

2185 (III )- 1984

12894-2002

5454-1976

 
 
 
Sand Plast India Limited.
 
Address:
Adjacent to Nagla Manchi CNG Station, Opp. I. P. Park, DVB Ashpond, Ring Road, New Delhi-110 002
 
Phone:
+91 11 2337 0551 - 52
 
Email:
[email protected]
[email protected]
 
 
Our Esteemed Clients
 
|
|
|
|
|
|
|
© Copyright Sand Plast India Limited, 2015. All rights reserved.